Kent Bengtsson (and several others) brought to our attention this company out of Toronto, Ontario, Canada, that has what is essential two variations of a magnet motor but with electrical assist, the power for which can be supplied by the magnet motor output, along with the power it provides for external use.
In other words, it harvests a principle of magnetism to provide continual, free energy (free, as in you don’t have to pay for fuel; the device cost is around $2.8 million per megawatt, which makes it competitive with the cheapest conventional power; with minimal maintenance.)
Here’s a chart from their brochure giving energy price comparisons, with theirs on the right:
The Levelized Cost Of Electricity (LCOE) is the average total cost to build and operate a power-generating technology over its lifetime divided by the total power output of the technology over that lifetime.
The LCOE for the MTG is significantly lower than all other competing forms of electricity generation. There are two key attributes contributing to the low LCOE for the MTG. First, unlike conventional forms of energy (such as natural gas or diesel), the MTG does not require any fuel. Second, the Capacity Factor of the MTG is stable (97% capacity at 100% load), unlike energy sources such as wind or solar where output depends on fluctuating weather conditions. These attributes, together with competitive numbers for capital costs, installation, and maintenance, contribute to the low LCOE of the MTG.
The return on investment, compared to a diesel generator, with its fuel and maintenance, is less than two years. And the MTG produces no pollution.
Their intro video, posted on December 15, 2015 on Facebook is getting thousands of views.
These people have obviously put a lot of time into their research and development, and they appear to have product available for distribution, starting at 5 MW (enough to power ~5000 homes average usage). They have safety certifications, and they have their patents filed.
What impressed me the most is the size of the parent company, NOCA, Inc., a leading global development and commodities trading firm, whose contact page lists 14 countries where they have offices.
In their brochure, they say:
Noca Clean Energy has developed a technology that will redefine the electrical energy generation sector. The Magnetic Transducer Generator (MTG) provides access to an inexpensive, continuously-available, and non-polluting method for generating electrical energy in a format that is applicable in both small-l and large-scale, fixed and portable energy scenarios. The MTG is currently available in several models with generation capacities starting at 5MW, and is easily customizable to larger scales.
Here are some notes from their video, with a few [comments].
10 kW scalable up to 300 MW+ [But for now, they will only do 5 MW and higher]
No carbon or sulfate emissions; no radiation; no heat; no pollution
Dependent on strength of magnets and the gauge of the wires in the coil assembly.
Made of aluminum, bearings, 52 magnetic turbines
Based on [the number sequence]: 278820
Approved in 72 countries worldwide.
Car engine invented in Toronto, 2015. Placed in a car could obtain speeds in excess of 800 KMH while consuming 4-5 amps from a 12-volt battery (which could easily be replenished by the output energy being produced).
Cheaper than any other motor-engine.
Can run in almost all environmental conditions, from -100C to 100C.
Energy comes from principles of magnetism. “This machine will consume magnetic fields.” Only last 75 years before having to be replaced.
“This high-tech engine will revolutionize the world. It is the game-changer the world has been waiting for.”
This paragraph from their brochure explains how it works:
The MTG contains a number of rotors; each attached to a central spinning shaft. Each shaft is comprised of a series of discs with magnets attached to the perimeter of each disc (see Figure 2). A small source battery provides the initial voltage that engages the rotors. As the rotors spin, each magnet on the disk passes a series of copper coil assemblies that are fixed at the same rotational height to the interior of the surrounding chassis. Each coil assembly is coupled with an electronic circuit unit that collects all output and directs a portion of the voltage back to the source battery to maintain rotational charge; excess voltage is usable output.
Here’s some correspondence I received from the CEO of Noca Clean Energy.
Collin H Haughton, September 3, 2015.
On 2016-01-22 10:40 pm [MST], Mr. Collin Haughton, wrote: (slightly edited)
Thank you for your interest in our technology.
I am not the inventor; I am merely the owner of the company that finance my team of engineers and inventors. It has taken us 14 years to streamline this technology and years of testing and field usage.
We have kept the MTG from the mainstream media, because we know, all too well, what happens when you step on the toes of the big boys.
Therefore we choose this year after the climate summit in Paris to release this technology, slowly. We believe the world is ready, and the movement is on its way.
Our business model is focused on
- infrastructure development projects within the developing Countries,
- utility companies that would like to build an MTG power plant or introduce the MTG as part of their energy mix, and
- private companies that would like to start their own utility company, especially in the developing countries.
For the (MIE) the Magnetic Inducer Engine, we are working with car manufacturers to deploy this engine in new car production. This is the most cost effective approach.
Currently, we do not manufacture an MTG smaller than 5MW, due to manufacturing cost. It does not make financial sense to do so. This also protects our patents, in ways I will explain later. Therefore, our target market is not for the individual home owners at this point in time. The current cost for a MTG is $2.8Million per megawatt, which is much cheaper than Gas, Solar , Wind, Nuclear and all available energy sources currently in use .
On 2016-01-23 2:33 pm, Mr Collin Haughton wrote:
We have [had] a Noca Inc website for the last 15 years, and [are] in no rush to develop a Noca Clean Energy Website, due to the type of technology and our business model. We are not targeting the masses. Our target market and clients are utility companies, governments and infrastructure development projects. With our years in supplying commodities to various countries, we have well-established relationships.
We will develop a Noca Clean Energy website in the near future. However, too much online presence will bring the wrong people to our doors. (We are taking the subtle and intimate approach) before we have the opportunity to deploy enough of our MTG and be seated firmly in the industry.
We tested the waters by sharing a video on Facebook, and the emails and telephone calls were overwhelming, the idea was to give the public an idea of what's coming down the pipeline, it was not intended for retail.
On 2016-01-23 2:53 pm, Mr Collin Haughton wrote:
Correct the smallest MTG we will be manufacturing [for now] is 5MW. However, we produce variety of different sizes for testing. The MTG used in the videos is a 15Kw. Therefore, the specs maybe referring to that unit in general.
On 2016-01-23 4:16 pm, Mr Collin Haughton wrote:
In two to three months, we are moving in a 100,000 ft2 facility in London, Ontario. This will greatly increase our capacity.
All said, given that they are in process of rolling out product, and given their credibility as a company, I've put them in #2 position in our Top 5 listing, behind Rosch.
- http://NOCAInc.com (There isn’t a specific page for the MTI or MIE yet.)
- NOCA Clean Energy CEO, Collin Haughton’s facebook post
- http://nce.energy/ - forbidden
NOCA Clean Energy Magnetic Power Generator
- (YouTube; January 22, 2016)
The following is transcribed from a jpg, with some editing.
Magnet Router Generator 5 Megawatt w/ network system (including GPS), Transformer with Regulator, 24 hour/day power. (Made in Canada)
Output Power Capacity: 5 MW / 4.9 MVA
Max Configurable Power: 5 MW / 4.9 MVA
Nominal Output Voltage: 480V, 3PH
Output Voltage Distortion: Less than 5% at full load
Output Frequency (sync to mains): 60 Hz - programmable
=/- 0.5 / 1 / 2 / 4 / 6 / 8%
Crest Factor: Unlimited
Topology: Delta Conversion On-Line
Waveform Type: Sine wave
Output Connections: (1) Hard Wire 4-wire (3PH + G)
Bypass: External Static Bypass
- - - - - - - - - - - - - - - - - - - - - - - -
[Note: Power is produce in AC. The transformer is required to convert the power to DC. This is standard technology and a requirement in power production and supply. The MTG is supplied and installed with both those devices. It is not sold separately. It's a package with our MTG.]
15000 Watt 110v <-> 220v 50 Ha/50/Hz
The AR Series Step Up / Step down Voltage Converter with Regulator (Stabilizer) provides a stable source of power for all major appliances and sensitive electronics. Each model is CE approved and certified.
In addition to converting 220/230/240 volts to 110/120 volts and vice versa, these voltage regulator transformers will stabilize either 120 volts or 220 volts. This means they will provide stabilized 120 volts when the input is 120v as well as providing a constant stabilized 220 volts when the input is 220/230/240 volts. The input parameters for stabilization (regulation) of power are 80 volts - 140 volts and 120 volts - 240 volts. The output is stabilized to either 110 volts or 220 volts =/- 4%.
- - - - - - - - - - - - - - - - - - - - - - - -
Made for Continuous Use - CE Approved
15000 Watt max load capaicity, Voltage converter plus Voltage Stabilization, Converts both ways from 220 volt to 110 volt and 110 volt to 220 volt, Safety Cut-Off Function, Unit requires hardwiring.
Heavy-duty 2 in 1 step up-down voltage converter and stabilizer for continuous use
Up to 15000 watts capacity
Converts 220/240 volts to regulate 110 volts
Converts 110 volts to regulated 220/240 volts Voltage input range at 220 volts is 180-260 volts and at 110 volt voltage input range is 75-130 volts.
Single phase 50/60 Hz frequency.
regulates the power flow to protect appliances against damage caused by voltage surges, voltage drops and spikes
Output voltage meter display Power
can be used continuously
Safety Cut-Off function allows units to shut off automatically in case of power fluctuation and turns back on in safe power range.
For use with home electronics, computers, refrigerators and other high-tech equipment.
Total 5 Outlets for output in front of the unit. (2 x 220 volt and 3 x 110 volt)
1 x 110 volt and 1 x 110 volt output terminals on the back of the unit for hardwiring the unit.
1 x 75-130 volt and 1 x 180-260 volt input terminals on the back of the unit for hardwiring the unit. CE approved Dimensions: L - 24" x W - 20" x H - 18" approx.
Weight: 95 lbs approx.
Manufacturer's model number: AR15000
Maximum Height: 91 inches
Maximum Diameter 79 inches
Aluminum structure; Light grey
- - - - - - - - - - - - - - - - - - - - - - - -
Operating Environment: -60 to +90 C
Operating Relative Humidity 0-95%
Operating Elevation: 0-999.9 meters
Storage Temperature: -50 to +90 C
Storage Relative Humidity: 0-95%
Storage Elevation: 0 to 15000 meters
Audible noise at 1 meter from surface of unit: 74 dBA
Online Thermal Dissipation: 1100 BTU/hr
Protection Class: NEMA 1 with NEMA 12 optional
Conformance Regulatory Approvals: cUL Listed, FCC Pat 15 Class A, ISO 14001, ISO 9001, UL 1778, UL Listed
- - - - - - - - - - - - - - - - - - - - - - - -
/END OF SPEC SHEET
The following comes from a PDF brochure:
Routine maintenance ensures efficient power generation with no down-time. Upon purchase, a maintenance contract will be catered specific to your organizational needs. Contact us for additional information and pricing regarding our maintenance program.
Profile: NOCA Inc.Noca Inc is the parent company of Noca Clean Energy , which is a Subsidiary of Noca Inc.
quoting from http://nocainc.com/about.php
NOCA is a leading global development and commodities trading firm. NOCA works with international and local partners in the development, logistics and execution of various infrastructure and trade initiatives principally in sub-Saharan Africa. The flexible NOCA business model allows it to seed, incubate and scale up a wide array of projects. NOCA is helping to develop new markets in Africa and beyond by participating in ambitious and transformative projects..
As a leading development and commodity trading firm, we act as partner to nations, corporations and communities. We’ve built our success through long-term partnerships. We endeavor to create lasting shared value while earning the trust of those around us through responsible practices and behaviours
Our development initiatives provide long-term funding and expertise to improve socioeconomic conditions for vulnerable communities around the world.
Their contact page lists fourteen countries where they have offices.
Profile: Collin Haughton, CEO
Here’s a little additional information about Mr. Collin and his company. They are also a manufacturer of mobile technology, such as Android and Windows Phones and tablets. Mr. Collin was the recipient for the Cadillac Technology and Innovation awards for 2014. (Image at right.) Noca Instrument is their mobile technology company. http://www.nocatab.com Their brands are Nocatab and Nocafone.
Profile: Noca Clean Energy
“Noca Clean Energy is a Canadian-based company positioned to be an industry leader by providing clean, cost-effective, efficient, and viable alternative energy technology to markets that have limited access, while simultaneously creating working, sustainable, environmentally-friendly power generation for years to come.”
I like their slogan: “The Planet is a terrible thing to waste.”
In the News
Featured / Top 5: Magnet Motors >
FOR SALE: Magnet Transduced Generator (MTG) and Magnetic Inducer Engine (MIE) by Noca Clean Energy - For now, this global company that has dealt with commodities distribution, with offices in 14 countries, are only doing 5 MW or larger MTG units, at a cost of $2.8 million/MW. Their levelized cost of electricity ($19/MW-h) is far better than other established energy sources. In the future, our transportation may be MIE-powered. (PESWiki; January 23, 2016)
Noca Instrument LLC
2800 Post Oak Blvd, Unit 4100
Houston, TX United States
Noca Instrument Ltd.
100 King Street West
Toronto, ON M5X 1C7
Mr. Collin Haughton, CEO
Mr. Jeffery Lui, Engineer
Thanks to: http://nexusilluminati.blogspot.com